Home

WDW Microcomputer Controlled Electronic Universal Testing Machine

WDW microcomputer-controlled electronic universal testing machine performance characteristics: This machine drives the crossbeam movement through an AC servo motor. The product is equipped with a fully digital multi-channel closed-loop measurement and control system, which is the latest generation measurement and control system developed using many advanced professional technologies. The control software can automatically calculate conventional data such as tensile strength, yield strength, elastic modulus, and non-proportional elongation strength RP0.2; it can achieve three closed-loop control; during the test process, it can display various test curves in real-time, such as force-displacement, force-time, stress-strain, etc., and can automatically switch and compare at any time. The computer control system for the test process control and data processing fully complies with the requirements of the corresponding national standards. Automatic zeroing, automatic shifting or non-segmented, automatic calibration, automatic data saving, and the option to use a single control method or multi-step control method for testing. The machine automatically stops after the sample breaks, and the test data is automatically saved, analyzed, and can assist in manual analysis, batch testing, batch processing, and automatic statistical results. The interface is beautiful, fully functional, easy to expand, easy to operate, and safe and reliable. Technical parameters: Model WDW-1 WDW-2 WDW-5 WDW-T10 WDW-T20 Maximum test force 1kN 2kN 5kN 10kN 20kN Accuracy level 0.5 Test force measurement range 0.2% - 100% FS Test force indication error ±0.5% Test force resolution 1/500000 of the maximum test force, no segmentation throughout. Crossbeam displacement indication error ±0.2% Displacement resolution 0.015 μm Force control rate adjustment range 0.005 ~ 5%FS/S Force control rate control accuracy When the rate <0.05%FS/s, it is within ±2% of the set value; when the rate ≥0.05%FS/s, it is within ±0.5% of the set value. Deformation rate adjustment range 0.005 ~ 5%FS/S Deformation rate control accuracy When the rate <0.05%FS/s, it is within ±2% of the set value; when the rate ≥0.05%FS/s, it is within ±0.5% of the set value. Crossbeam speed adjustment range 0.001 ~ 500mm/min Crossbeam speed relative error within ±0.2% of the set value Constant force, constant deformation, constant displacement control range 0.5% ~ 100%FS Constant force, constant deformation, constant displacement control accuracy When the set value ≥10%FS, it is within ±0.1% of the set value; when the set value <10%FS, it is within ±1% of the set value. Tensile space (excluding fixtures) 950mm 1000mm Compression space 880mm 800mm Effective test width None 410mm Dimensions (mm) 600×420×1700 780×500×1680 Main power supply 220V/50Hz, ±10% 220V/50Hz, ±10% Power 0.75KW 0.75KW Main machine weight Approximately 200Kg Approximately 350Kg Large deformation measurement range 10 ~ 800mm Note 1. Fixtures and deformation measurement devices and other accessories are configured according to customer requirements. Large deformation indication error within ±2% of the indication. 2. Local adjustments can be made according to user requirements. Large deformation resolution 0.008mm. 3. Specially increased and widened test space can be customized.

Classification:

Electronic Universal Testing Machine

Key words:

008613204662621

dawn@tianchentest.com

Product inquiry

Related Products

Product Details

WDW Microcomputer Controlled Electronic Universal Testing Machine

Performance Characteristics:
This machine drives the crossbeam movement through an AC servo motor. The fully digital multi-channel closed-loop measurement and control system configured for the product is the latest generation measurement and control system developed using many advanced professional technologies. The control software can automatically calculate conventional data such as tensile strength, yield strength, elastic modulus, and non-proportional elongation strength RP0.2; it can achieve three closed-loop control; during the test process, it can display various test curves in real-time, such as force-displacement, force-time, stress-strain, etc., and can automatically switch and compare at any time. The computer control system for the test process control and data processing fully complies with the corresponding national standards.

Automatic zeroing, automatic gear shifting or non-gear shifting, automatic calibration, automatic data saving, and the option to use a single control method or multi-step control method for testing. The machine automatically stops after the sample breaks, automatically saves test data, automatically analyzes it, and can assist in manual analysis, batch testing, batch processing, and automatic statistical results. The interface is aesthetically pleasing, fully functional, easy to expand, simple to operate, and safe and reliable.

Technical Parameters:

Model		WDW-1	WDW-2	WDW-5	WDW-10	WDW-20
Maximum Test Force		1kN	2kN	5kN	10kN	20kN
Accuracy Level		0.5 Class
Test Force Measurement Range		0.2% - 100% FS
Test Force Indication Error		±0.5%
Test Force Resolution		1/500000 of the maximum test force (1000000), no gear shifting throughout.
Crossbeam Displacement Indication Error		±0.2%
Displacement Resolution		0.015 μm
Force Control Rate Adjustment Range		0.005 ~ 5%FS/S
Force Control Rate Control Accuracy		When the rate is <0.05%FS/s, it is within ±2% of the set value; when the rate is ≥0.05%FS/s, it is within ±0.5% of the set value.
Deformation Rate Adjustment Range		0.005 ~ 5%FS/S
Deformation Rate Control Accuracy		When the rate is <0.05%FS/s, it is within ±2% of the set value; when the rate is ≥0.05%FS/s, it is within ±0.5% of the set value.
Crossbeam Speed Adjustment Range		0.001 ~ 500mm/min
Crossbeam Speed Relative Error		Within ±0.2% of the set value
Constant Force, Constant Deformation, Constant Displacement Control Range		0.5% ~ 100%FS
Constant Force, Constant Deformation, Constant Displacement Control Accuracy		When the set value ≥10%FS, it is within ±0.1% of the set value; when the set value <10%FS, it is within ±1% of the set value.
Tensile Space (excluding fixtures)		950mm			1000mm
Compression Space		880mm			800mm
Effective Test Width		None			410mm
Dimensions (mm)		600×420×1700			780×500×1680
Main Power Supply		220V/50Hz, ±10%			220V/50Hz, ±10%
Power		0.75KW			0.75KW
Main Machine Weight		Approximately 200Kg			Approximately 350Kg
Large Variable Shape	Large Deformation Measurement Range	10 ~ 800mm	Note	1. Fixtures and deformation measurement devices and other accessories are configured according to customer requirements.
	Large Deformation Indication Error	Within ±2% of the indication		2. Local adjustments can be made according to user requirements.
	Large Deformation Resolution	0.008mm		3. Specially increased and widened test spaces can be customized.

Contact Us

Company Address:No.88, Ke Yun Road, Licheng District, Jinan City, Shandong Province

Sales Hotline: 008613204662621

Enterprise E-mail:dawn@tianchentest.com

Power by : 300.cn | S EO Label

Business License