Home

Microcomputer Controlled Torsion Testing Machine NDW-500/1000/2000/3000/6000

This series of testing machines is suitable for the torsional performance testing of metal materials, non-metal materials, composite materials, and components. Tests can be conducted according to the national standard "GB/T10128-1998 Method for Torsion Testing of Metals at Room Temperature" and data can be provided.

Classification:

Twisting testing machine

Key words:

008613204662621

dawn@tianchentest.com

Product inquiry

Related Products

Product Details

1. Main functions of the equipment:
This series of testing machines is suitable for the torsional performance testing of metal materials, non-metal materials, composite materials, and components. Tests can be conducted according to the national standard 'GB/T10128 Metal Room Temperature Torsion Test Method' and data can be provided.
2. Equipment composition:
The microcomputer-controlled electronic torsion testing machine mainly consists of four parts: the main machine, torsion angle measurement device, dedicated measurement and control system, and computer. During the test, the computer software sends instructions to the control unit to rotate the servo motor, which drives the moving chuck through a reducer. When the moving chuck rotates, it applies a torque to the specimen, which is transmitted through the specimen to the fixed chuck, and then to the torque sensor. The output signal from the torque sensor is sent to the measurement amplification circuit in the control unit, and then converted to digital format through A/D conversion into the computer. The torsion angle is measured using a photoelectric encoder to obtain an accurate torsion angle value.
3. Main technical parameters:
1. Maximum torque: 500/1000/2000/3000/6000Nm,
2. Accuracy level of the testing machine: 1/0.5 level;
3. Torque measurement range: 2%-100%FS;
4. Relative error of torque indication: within ±1% of the indicated value;
5. Torque resolution: 1/±500000 (1000000) of the maximum torque (full-scale resolution remains unchanged);
6. Minimum resolution of torsion angle: 0.1°;
Torsion angle for small angle measurement: minimum resolution displayed is 0.001°
7. Relative error of torsion angle indication: within ±1% of the indicated value;
8. Relative error of the torsion meter's torsion angle indication: within ±1% of the indicated value;
19. Torsion speed: 0-6r/min;
11. Relative error of torsion speed: within ±1% of the set value;
13. Maximum distance between the two chucks: 650mm;
14. Power supply: 220V±10%;
4. Main configuration:
1. A set of main machine frame and transmission parts;
2. A set of servo motor and servo controller;
3. One cycloidal pinwheel reducer;
4. One torque sensor;
5. A set of torsion angle measurement system within the standard distance;
6. A set of dedicated measurement and control system;
7. A set of TENSON Chinese version torsion testing software;
8. A set of torsion chucks.
9. One computer;
10. One printer;